spark-memory-thermal-ops – skill Agent & Tự động hóa cho agent AI

Spark Memory & Thermal Ops

DGX Spark's GB10 chip has one 128GB unified

memory (UMA) pool shared by CPU and GPU, and a

sustained power ceiling well below its rated

figure. Both break discrete-GPU assumptions:

headroom isn't what nvidia-smi reports, and a

run that starts fast will slow down mid-job

with nothing misconfigured. This skill covers

planning memory headroom, working an actual

OOM, and watching thermals across a long job.

For launch-time failure modes (ABI mismatches,

flash-attn, playbook breakage), see

spark-training-gotchas — this skill assumes

the job starts.

Common Issues Quick Reference

| Situation | Do this |

|---|---|

| Planning headroom before launch | Budget against free -g, not nvidia-smi — see UMA Memory Model |

| Job OOMs on unified memory | Work the OOM Ladder in order: flush, then batch/pack, then method downgrade |

| Throughput drops mid-run | Check the power/temp log before assuming a config bug — see Thermal Monitoring |

| Trainer + inference server both wanted | Run one at a time — see Concurrent Workloads |

When to Use This Skill

• Sizing a training run against the 128GB pool

before launch — will this model, method, and

batch/pack combination fit.

• A run OOMs mid-load or mid-step and the

remediation order matters — what to try first,

second, third.

• Watching temperature and power during a

multi-hour job, deciding whether a slowdown is

thermal throttling or something else.

• Planning to run a trainer alongside an

inference server (vLLM, Ollama) on the same box.

UMA Memory Model

Spark has no separate GPU VRAM — the GPU and

CPU share one 128GB pool. Two consequences:

• **nvidia-smi and cudaMemGetInfo

underreport pressure — or report nothing at

all.** Both report CUDA-allocator-visible

memory, not the pool's actual state — a box can

show headroom in nvidia-smi and still OOM,

because page-cache and mmap'd pages the

allocator doesn't see consume the same pool. On

some driver/setups, the memory query returns

[N/A], [N/A] outright instead of a number — a

script grepping for a numeric value there gets

nothing, not a misleading undercount (see

spark-training-gotchas gotcha G3).

• **Model load is a transient peak, not the

steady state.** Loading safetensors weights

mmaps the file, then copies into CUDA

tensors — for a window during load, both the

mmap'd pages and the CUDA copy count against

the pool at once. A model that fits while

training can still OOM during load if headroom

was sized for the post-load footprint instead

of this doubled transient.

Plan and diagnose with free -g, not

nvidia-smi:

free -g | awk 'NR==2 {print "free:", $4, "GB"}'

Rule of thumb: take that free figure, subtract a

few GB for OS/driver overhead, and budget against

the result — not the 128GB spec number.

The worksheet in references/uma-accounting.md

accepts parameter count, dtype, and method as

input, and returns a memory estimate to compare

against known anchors.

Planning Sequence

Before launch, work through these in order:

1. Read free -g; subtract OS/driver overhead

for the budget.

2. Estimate weights + optimizer + gradients +

activations from references/uma-accounting.md.

3. Compare against the closest anchor (70B

QLoRA, 27B LoRA, 9B full FT), not the

estimate alone.

4. If the estimate is close to the budget, start

with shorter packing or a smaller batch —

cheaper than hitting the OOM Ladder mid-run.

Example: Sizing a 70B QLoRA Run

A sanity check of the worksheet formula against

the ≈40GB anchor:

params = 70e9
weights_gb = params * 0.5 / 1e9      # NF4, step 1
adapter_gb = 0.5                     # step 5, negligible
total_gb = weights_gb + adapter_gb   # + activations
print(f"{total_gb:.0f}GB before activations")

Weights alone land near the ≈40GB anchor — a plan

estimating far above that for the same model

class is a signal to recheck dtype and method.

The OOM Ladder

When a job OOMs on unified memory, work this

ladder in order. Each step is more disruptive

than the last — don't skip ahead:

reducing batch size is never step 1.

1. Flush the buffer cache. Page cache from a

previous run or a large dataset read often

accounts for GB of the "missing" headroom.

This costs nothing but a rerun and doesn't

touch the job's configuration:

   sync; echo 3 > /proc/sys/vm/drop_caches
   

Needs root; a between-run reset, not a

mid-training step. See

spark-training-gotchas (gotcha G3) for the

full diagnostic behind this step.

2. Reduce batch size or packing length. Only

after a flush fails to free enough headroom,

cut batch size or packing length — the first

step that changes what the run does. Prefer

packing length first; it drives activation

footprint more directly at long context.

3. **Downgrade the method: bf16 LoRA before

QLoRA.** If flushing and shrinking batch/pack

still OOM, drop the method a tier — bf16 LoRA

is next, not the reverse. QLoRA's bitsandbytes

dequantization buffers are transient CUDA-side

allocations that can OOM before an equivalent

bf16 LoRA run would, even though QLoRA's

steady-state footprint is smaller. A QLoRA OOM

is not proof the model doesn't fit.

Fall back further (smaller model, multi-Spark)

only after all three steps and the job still

won't fit.

Thermal Monitoring

Multi-hour runs push into Spark's sustained

power ceiling, well under the rated figure —

expected platform behavior, not a symptom to

explain away:

• Sample temperature and power alongside the

training logs, not after a slowdown is

noticed — every 30-60 seconds correlates a

throughput drop with a thermal event. Keep

the CSV output format assets/thermal-sample.sh

writes, so timestamps line up against the log:

  bash assets/thermal-sample.sh 30 thermal.log
  

• **A sustained ~100W power draw is the platform

cap, not a configuration bug.** Don't re-tune

batch size or precision to "fix" a plateau

that's the box behaving normally under load.

If temperature climbs while power stays flat

under the rated 240W figure, that's the

signature to recognize.

• Log throttle events explicitly instead of

letting a run silently slow down unrecorded. A

run whose per-step time doubles two hours in

should show that in the log, correlated against

the thermal sample at that timestamp. Full

throttling diagnostics: spark-training-gotchas

(gotcha G4).

Concurrent Workloads

Because the 128GB pool is global, eviction

happens without either process's logs showing

an OOM:

• The one-heavy-job rule applies to **uncapped or

near-capacity** workloads — an uncapped trainer

and inference server (vLLM, Ollama) compete for

the same pool. A small, capped workload doesn't:

a <4GB LoRA fine-tune coexists fine alongside

vLLM capped at gpu-memory-utilization<=0.5 —

check the other process's cap, not just its

presence, before stopping it.

• Inference servers evict trainer pages silently

under uncapped/near-capacity contention, and

vice versa — neither logs an error, so a slow

run or lost KV cache is a contention symptom to

check for. Stop unrelated *uncapped* servers

before a long or full-pool run.

Check for GPU-resident processes first:

ps aux | grep -E 'vllm|ollama|trl|axolotl' | grep -v grep

This procedure complements spark-training-gotchas

(gotchas G3, G4, G6) — that skill covers launch-time

failures; this one, the running job.

Memory math worksheets:

references/uma-accounting.md.