spark-environment-setup – skill Dữ liệu & Khoa học cho agent AI

Spark Environment Setup

DGX Spark ships a GB10 Grace Blackwell chip: aarch64 CPU, SM121

GPU, 128GB unified memory, CUDA 13. This is a narrower and

younger platform than a standard x86 CUDA 12 box, so package

selection and ABI matching matter more than usual — the wheel

ecosystem for aarch64 + CUDA 13 is still filling in.

When to Use This Skill

• Setting up a fresh Spark box for training or inference.
• Hitting an import error mentioning libcudart, a missing

symbol, or a wheel that "installed fine but won't load."

• A framework install (PyTorch, Unsloth, TRL, vLLM, xformers)

fails, hangs, or silently falls back to CPU.

• Deciding whether to use an NGC container or bare pip.
• Restoring a working setup after an OS reinstall or a

base-image update, needing to re-verify from scratch.

Each of these accepts the same general fix: match the

container/wheel combination to CUDA 13 and SM121, don't fight

the ABI.

Container-First Rule

Quick decision, before the detail below:

• Standard training/inference work → NGC PyTorch container.
• Unsloth-centric fine-tuning → Unsloth container (it ships

the pinned Triton/xformers/transformers combination already

validated for that path).

• Neither fits (custom system package, local IDE interpreter)

→ bare pip, following the exact sequence further down.

Default to a container. Use nvcr.io/nvidia/pytorch:25.09-py3

as the base for general work — the newest tag confirmed working

on this hardware; pull a newer blessed tag if locally available

rather than hard-blocking on 25.11-py3. NGC's tag is dated, so

running it directly is fine:

docker run --runtime=nvidia --gpus all -it --rm \
  nvcr.io/nvidia/pytorch:25.09-py3

unsloth/unsloth:dgxspark-latest is a *moving* tag by

contrast — resolve and pin its digest before running it for

anything reproducible; the bare tag is a discovery step only,

not the default invocation. Full pull-inspect-pin sequence and

flag rationale/volume mounts for finetuning/ run dirs:

references/container-workflow.md. Treat bare pip as the exception.

The reason for the container-first stance is pinning, not

convenience. Triton, xformers, and transformers versions

interact narrowly with GB10's SM121 target and CUDA 13; a

container locks all of them together against a combination

already validated on this hardware. Bare pip leaves that

resolution to you, one broken import at a time.

When bare pip is warranted, follow the NVIDIA playbook's

install sequence verbatim and in order:

pip install "transformers==5.13.1" "peft==0.19.1" "hf_transfer==0.1.9" "datasets==4.3.0" "trl==1.8.0"
pip install --no-deps "unsloth==2026.7.2" "unsloth_zoo==2026.7.2" "bitsandbytes==0.49.2"
pip install -U "torchao==0.17.0"

The second command's --no-deps flag is not optional —

letting pip re-resolve Unsloth's dependency tree on aarch64 is

a common way to pull in an incompatible torch or triton build.

The third line is not optional either: the NGC base image's

bundled torchao is too old for current peft's LoRA-attach

path (`ImportError: ... torchao ... only versions above 0.16.0

are supported) — a hard blocker, not a warning. Every ==` pin

above is load-bearing, taken from the dated known-good version

matrix in references/stack-matrix.md (its Last verified date

governs staleness) — an unpinned install resolves current PyPI

versions well outside what this Unsloth release supports.

Pull a fresh tag when a new blessed release is announced.

Rebuild locally from one of the two bases only when a project

needs an extra system package layered in — not to "upgrade" a

component the image already pins. Details on both paths:

references/container-workflow.md.

One more preflight: official DGX Spark playbooks have shipped

broken before. Check recent issues on

github.com/NVIDIA/dgx-spark-playbooks (and the other

resources in references/stack-matrix.md) before trusting a

recipe verbatim for a long run.

The ABI Rule

The single most common failure on Spark is a CUDA 12/13 ABI

mismatch: a wheel built against libcudart.so.12 loaded on a

system that only has libcudart.so.13. The install usually

succeeds; the failure surfaces later as a missing-symbol error

or a segfault that doesn't obviously point at CUDA.

Fix: pull wheels from download.pytorch.org/whl/cu130 (the

cu130-tagged aarch64 builds), or use one of the containers

above, which already carry a matched build. Before chasing a

stack trace that mentions a CUDA symbol, check which CUDA tag

the installed wheel was built against:

python3 -c "import torch; print(torch.version.cuda)"

If that output doesn't start with 13, the ABI mismatch is the

first thing to fix. NGC container builds (e.g.

nvcr.io/nvidia/pytorch:25.09-py3) build torch internally

against CUDA 13 with no +cu130 wheel tag — pip show torch

won't say cu130 there, and that absence alone is not a failure.

Typical symptoms:

• ImportError: undefined symbol referencing a CUDA runtime

function.

• A segfault on the first .cuda() call, no useful traceback.
• A wheel that installs cleanly, then fails at import time —

pip's resolver doesn't check CUDA ABI, only version constraints.

• Two "identical" environments behaving differently — usually one

has a cu130 wheel, the other a cu121/cu124 leftover.

The fix is the same regardless of symptom: match the wheel's

CUDA tag to the system, or use a container that already does.

Component Quick Table

Condensed status for the components most likely to come up.

Full table with wheel URLs, build flags, the sm_121 vs sm_121a

distinction, and the dated known-good version matrix:

references/stack-matrix.md.

| Component | Status |

|---|---|

| PyTorch | ✅ official cu130 aarch64 wheels |

| bitsandbytes | ✅ works out of the box |

| Triton | ✅ needs the TRITON_PTXAS_PATH parameter set |

| flash-attn | ❌ skip pip build; NGC bundles a working one — see spark-training-gotchas G2 |

| xformers | source build only (TORCH_CUDA_ARCH_LIST=12.1) |

| vLLM | nightly wheels only |

| TransformerEngine / NVFP4 train | container-only |

Everything else — Unsloth, Axolotl, TRL, PEFT — installs

cleanly through the container-first path above. LLaMA-Factory

and NeMo are fragile on Spark; check upstream issues first.

Verification Commands

Confirm the environment can actually see the GPU before

running anything expensive:

import torch
print(torch.cuda.is_available(), torch.version.cuda)

This call returns two values; the exact output format is one

line, <bool> <cuda-version>:

True 13.0

If it prints False instead, don't jump straight to a wheel

reinstall — ABI mismatch is one cause among several:

| Hypothesis | Quick check |

|---|---|

| Runtime/flags | nvidia-smi fails in-container too |

| Device visibility | echo $CUDA_VISIBLE_DEVICES |

| Permissions | ls -l /dev/nvidia* |

| CUDA init state | wedged process; retry fresh shell/container |

| ABI mismatch (usual culprit) | torch.version.cuda not 13.x |

Check nvidia-smi first — if it doesn't show the GPU, it's one

of the first three, not ABI. Reinstall a wheel only once ABI is

confirmed. Per-hypothesis detail: references/stack-matrix.md.

Run right after the container starts, before installing

project-specific packages.

One more check: if Triton kernel compilation fails once

training starts, set

TRITON_PTXAS_PATH=/usr/local/cuda/bin/ptxas and retry — see

references/stack-matrix.md for the full workaround list.

Next Steps

A verified environment is only the starting point. See also:

spark-training-gotchas for failure preflights before a

training run, and spark-memory-thermal-ops for unified-memory

OOMs and thermal throttling during long ones.